Description
Use code Summer2026 to save 7% at checkout!
🌞 The World’s First True 3.0+ PPE CMH / Sunlike LED Platform
2026 ProTerp 800W CMH / Sunlike Full Spectrum LED
Dedicated Cyan & Green • Dual Red Architecture • Independently Dimmable 730nm Far Red
The 2026 ProTerp Series was built around a straightforward principle:
Spectrum first. Efficiency second. Never remove critical wavelengths just to inflate performance numbers.
The ProTerp Series represents our highest-efficiency CMH / Sunlike style platform to date, delivering 3.08–3.23 PPE (400–700nm) and 3.25 ePPE (380–800nm) depending on far red configuration, performance levels never seen before with broad-spectrum, high-CRI, multi-peak horticultural lighting.
Most modern horticultural LEDs achieve higher efficacy by concentrating output into narrower portions of the spectrum—often pushing red content aggressively upward of 55–65% while reducing spectral complexity.
The ProTerp Series was engineered differently.
After thousands of hours of development, side-by-side testing, spectral revisions, and real-world cultivation refinement, we developed a fixture designed to reproduce the balanced multi-peak behavior growers valued from premium CMH and broad-spectrum discharge lighting while extending modern LED efficiency further than traditional full-spectrum approaches.
By combining high diode density, thermal optimization, and spectral engineering, the result is a true 380–800nm CMH / Sunlike style platform built to support:
- Plant morphology
- Canopy penetration
- High PPFD cultivation
- Spectral completeness
- Terpene and trichome production
- Increased oil production
- Full-cycle crop performance from seed / clone to harvest
This is not another red-heavy fixture optimized around spreadsheet efficacy.
This is a purpose-built multi-peak platform engineered around spectral balance, thermal performance, and real-world cultivation outcomes.
🌈 Why Spectrum Matters
But spectrum determines how those photons are used.
A plant receiving high intensity under an incomplete spectrum will not perform the same as one receiving balanced spectral input.
The ProTerp was designed to deliver broad-spectrum energy across blue, green, red, and far red wavelengths to create a lighting environment that behaves more like natural daylight than conventional narrow-band horticultural fixtures.
The objective isn’t simply more photons.
It’s delivering the right photons in the right proportions.
🌈 The Spectrum Architecture
🔵 Triple Blue Platform
437nm + 450nm + Dedicated 480nm Cyan (triple Blue)
Designed to support tighter morphology, signaling behavior, structural development, and balanced growth under high-intensity environments.
🟢 Emerald Green Mid-Band
525nm Green improves whole-canopy activation and deeper penetration into dense flowering environments.
🔴 Dual Red Architecture
Rather than oversaturating the fixture with red to chase efficacy numbers, the ProTerp uses controlled red balancing.
By smoothing the natural reduction between 600–640nm, the fixture improves spectral continuity and photon efficiency while intentionally keeping total red below 40%.
The goal isn’t exaggerated red loading.
The goal is a smoother spectral curve.
🌸 Independently Dimmable 730nm Far Red
Far red should be adjustable, not permanently forced into the fixture.
The dedicated dimmable 730nm channel allows growers to introduce additional far red only when desired for crop steering and morphology management.
⚡ Sphere Verified Performance
Mode 1 — Baseline CMH / Sunlike Profile (730nm Disabled)
- Power Draw: 814.6W
- PPF: 2633 µmol/s
- ePPF: 2666 µmol/s
- PPE: 3.23 µmol/J
- ePPE: 3.25 µmol/J
- Luminous Efficacy: 195.6 lm/W
- Total Lumens: 159,305
- CCT: 5396K
- CRI: 87.4
Spectrum Balance
- Blue → 25.3%
- Green / Yellow → 38.9%
- Red → 34.6%
- Far Red → 1.2%
Mode 2 — Crop Steering Mode (730nm Enabled)
- Power Draw: 861.5W
- PPF: 2658 µmol/s
- ePPF: 2802 µmol/s
- PPE: 3.08 µmol/J
- ePPE: 3.25 µmol/J
- Dedicated Far Red Output: Up to 23.56W
- Far Red Photon Flux: 144.2 µmol/s
- CCT: 5376K
- CRI: 87.7
Spectrum Balance
- Blue → 24.3%
- Green / Yellow → 37.2%
- Red → 33.4%
- Far Red → 5.1%
🌱 Precision Crop Steering
Vegetative & Early Flower
Introduce lower levels of far red to encourage canopy expansion and moderate internodal extension in cultivars that remain overly compact.
Mid–Late Flower
Apply far red after stretch to support uniform floral development and manage late-cycle finishing behavior.
Run it fully disabled for traditional broad-spectrum performance.
Turn it up when the environment and genetics benefit from additional steering.
🔧 Hardware Platform
Nearly 5 diodes per watt.
Higher diode density reduces thermal stress, improves photon uniformity, supports long-term output stability, and minimizes efficiency loss over time.
- Custom binned 5000K whites with enhanced 437nm response
- Ledestar 4000K Whites with 450nm Blue
- Ledestar 480nm Cyan
- Ledestar 525nm Emerald Green
- Ledestar 640nm Red
- Osram 660nm Deep Red
- Independently Dimmable 730nm Far Red
Standard Features
- Manual Dimming
- RJ Control Compatibility
- Full-Cycle Spectrum Design
Recommended Coverage
- Flower: 4×4, 5×5 High Intensity → up to 6×6 depending on PPFD targets and CO₂ usage
- Vegetative / Autoflower: Up to 6.5×6.5
Ordering & Support
Questions about setup, spectrum, controllers, or application?
Facebook / Instagram: @MosIndoorLighting
Call / Text: 816-280-1200
Email: Support@mosindoorlighting.com
Due to high demand, the 2026 ProTerp Series currently has a 2–3 week lead time.
If you’re ordering a ProTerp overhead fixture and a ProTerp Under Canopy at the same time, give us a call or send us a message before placing your order.
We’ll honor the 7% SUMMER2026 discount on both fixtures and take an additional $50 off. Thank you for your continued support and sorry about the lead times we’re hoping to be back to 2-3 day processing by the end of September. As always happy growing!
Reviews
There are no reviews yet.